Specify trims with the garment: type, dimensions, finish, colour, quantity, and end use.

Home / Trims & Accessories

Finishing parts for teamwear and private-label ranges

Sportswear Trims & Accessories

Zips, drawcords, snaps, webbing and buckles are part of the garment specification, alongside woven labels and hang tags. The sixteen black and gunmetal components below show the trim types buyers ask about. Name the part, its size and colour in your brief, and approve it on the sample.

16 component types, shown in black and gunmetal

A Reference Grid Of Common Trims.

Zippers

Waterproof reverse-coil zipper

Zippers

Two-way separating zipper

Zippers

Molded-tooth zipper

Buckles & Rings

Side-release buckle

Buckles & Rings

Gunmetal D-ring

Buckles & Rings

G-hook buckle

Hardware

Magnetic quick-release buckle

Hardware

Suspender & overall clip

Fastening & Tapes

Eyelets & grommets

Webbing & Straps

Polyester webbing

Webbing & Straps

Polypropylene webbing

Webbing & Straps

Elastic webbing

Fastening & Cord

Drawcord & cord lock

Component decisions before sampling

Specify The Trim With The Garment.

PakGul Textiles makes custom teamwear in its own factory in Sialkot, Pakistan. Trims are specified as part of each garment: the zip on a quarter-zip, the drawcord and eyelets on a hoodie, the elastic on a training bib, the snaps on a jacket. List them with the woven labels, hang tags and packaging so the sample shows the finished product. The grid above shows example types, not a stock list.

01

Identify The Part

Send the product drawing or reference and mark every trim position. State the zipper construction, ring shape, buckle release method, hook movement, webbing fibre, strap route, or fastening type instead of using a general hardware description.

02

Set Dimensions & Finish

Record zipper length, tape colour, inside buckle width, webbing width and thickness, hook opening, snap diameter, plating, gloss level, and visible puller or logo requirements. The surrounding construction must accept the selected size.

03

Approve On The Sample

Open, close, rotate, pull, adjust, and load the component in the finished product. Check that edges do not catch fabric or skin, webbing feeds correctly, attachment points remain stable, and colour and finish match the approved sample.

04

Confirm It In The Quote

Include quantity per design, delivery destination, target date and packaging needs. The order minimum is 10 pieces per design. Whether a special part, such as a branded zip puller, can be supplied is confirmed in the quote, and lead time is set after sample approval.

Prepare a complete garment brief

Send The Garment, Trim List, Quantity And Destination.

Attach the garment drawing or reference and mark each trim position. Include dimensions, colour, finish, labels, quantity per design, destination and deadline.